Gadgetbridge 0.76.0/0.76.1: Material 3, and a lot of new devices supported

 — 

Almost two month between major releases, but the wait is over, and Gadgetbridge 0.76.0 (and 0.76.1 which mostly fixes regression) has been released!

This time we did not only add support for new Amazfit devices (Bip 3 Pro, Bip 5, Cheetah, Cheetah Pro, Bip 5, Falcon …

Category: Releases

Gadgetbridge 0.75.0: Native OsmAnd support

 — 

Again after more than 1.5 month, a new Gadgetbridge release finally is ready! The F-Droid black box is still black though. :P

Traditionally we bump the release by a non-point release when support for a new device gets added or a big new code feature gets added, this time …

Category: Releases

Gadgetbridge 0.74.0: Amazfit GTR 3 Pro, Sony WH-1000XM5, and a lot of improvements!

 — 

After more than 1.5 month, finally a new Gadgetbridge release is ready!

On the new device front we have support for one new Huami device, the Amazfit GTR 3 Pro and another Sony Headphone, the WH-1000XM5.

Mostly contributed by José, who also did the Sony WH-1000XM5 support, we have …

Category: Releases

Gadgetbridge 0.72.0: Lot of new devices and rewritten device discovery

 — 

It took unusually long to get this out, but we tried to make it before Christmas, so here it is: Gadgetbridge 0.72.0

And since it is already out on F-Droid, todays blog post will be written by ChatGPT to save time. :O

Q: Can you please write a …

Category: Releases

Gadgetbridge 0.71.x: Initial support for Amazfit GTR 3 and SuperCars (Shell Racing Cars)

 — 

After some delays and fine-tuning of the release, next version of Gadgetbridge is now out with whole lot of changes. Interestingly, it is not 0.71 but already 0.71.3 as of the writing of this blog post.

Initial support for Amazfit GTR 3 and SuperCars (Shell Racing Cars …

Category: Releases

Gadgetbridge 0.70.0: Initial support for Amazfit GTS 3, for Fossil Hybrid Gen6 and for Flipper Zero

 — 

Initial support for Amazfit GTS 3, for Fossil Hybrid Gen6 and for Flipper Zero

Initial support for Amazfit GTS 3 has been provided by Codeberg user sedy89. This is based on the recent addition of support for the Mi Band 7 and thus has similar set of features and limitations …

Category: Releases

Gadgetbridge 0.69.0: Initial support for Mi Band 7, Binary Sensor Service and for Fossil 38mm

 — 

Our small group of Gadgetbridge contributors has been very busy in the past several weeks and the changelog of this new release really shows it. Today, Gadgetbridge is bringing support for some new devices together with features, bug fixes and improvements to existing devices and the app itself.

Initial support …

Category: Releases

Gadgetbridge 0.68.0: Multiple device connections - a huge release!

 — 

After almost two months of work since the last version, we finally released one of the biggest releases of all time!

Multiple device connections

Gadgetbridge could traditionally only connect to one device at one moment. That was mostly enough since not many people would need to connect to two smart …

Category: Releases

Gadgetbridge 0.67.0: Initial Support for Sony WF-1000XM3 and Galaxy Buds Pro

 — 

After two months of development since the last version, we have yet another very interesting feature rich release to talk about. Development felt a bit slow at the beginning but looking at the changelog, there are many additions, improvements and also some newly supported devices.

New devices

Lets start with …

Category: Releases

Gadgetbridge 0.66.0: Initial support for Casio GBD-H1000 and Hama Fit Track 1900

 — 

Support for two new devices has been added - the Casio GBD-H1000 and Hama Fit Track 1900. Both of these additions use existing device implementations and add a new name of the device as chosen by the vendor, allowing more people to use their devices with Gadgetbridge.

Arjan Schrijver worked on …

Category: Releases

© Gadgetbridge developers - 2023

Powered by Pelican